Products
-
Single Way Blower Fresh Air Filtration Systems
- Installation Type 1: Air Filtration System
- Installation Type 2: Air Filtration System + UVC Disinfection Box
- Installation Type 3: Air Filtration System + Energy Recovery Ventilator
-
Fresh Air Dehumidifier
More efficient, stable and reliable refrigeration and dehumidification system
-
Sensible Crossflow Plate Heat Exchangers
- Made by flat aluminum foils of 0.12mm thickness
- Two air streams flow crossly.
- Suitable for the room ventilation system and industrial ventilation system.
- Heat recovery efficiency up to 70%
-
Cross Counterflow Plate Heat Exchangers
- Made by flat aluminum foils of 0.12mm thickness
- Partial air flows crossly and partial air flows counter
- Suitable for room ventilation system and industrial ventilation system.
- Heat recovery effciency up to 90%
-
Ceiling Heat Pump Energy Heat Recovery Ventilation System
Compared to the traditional fresh air exchanger, below are our advantages:
1.The two-stage heat recovery system with heat pump and air heat exchanger.
2.Balanced ventilation deals with indoor air fast and efficiently to improve its quality.
3.Full EC/DC motor.
4.Special PM2.5 filter with high efficiency and low resistance.
5.Real-time household environment control.
6.Smart learning function and APP remote control.
-
In-Room Precision Air Conditioner (Link-Wind Series)
Features : 1. High Efficiency and Energy Saving -Optimum design of heat exchanger and air duct by CFD, high efficiency and low resistance for heat and mass transfer -Pleated G4 pre- filter filter with big surface area, large capacity and low resistance -Classified refrigeration system design, intelligent cooling capacity adjustment -High precision PID Damper (chilled water type) -High COP compliant scroll compressor -High-efficient and low-noise unhoused fan (Sinking Design) -Stepless Speed ... -
In-Row Precision Air Conditioner (Link-Thunder Series)
Link-Thunder series in-row precision air conditioner, with the advantages of energy saving , safe and reliable intelligent control, compact structure, advanced techniques, ultra high SHR and cooling close to heat source, fully satisfy the cooling requirements of data center with high heat density. Features 1. High Efficiency and Energy Saving -Optimum design of heat exchanger and air duct by CFD, with high efficiency and low resistance for heat and mass transfer -Ultra high sensible heat rat... -
In-Rack Precision Air Conditioner (Link-Cloud Series)
Link-Cloud Series In-Rack (Gravity Type Heat Pipe Rear Panel) Precision Air Conditioner is energy saving, safe and reliable with intelligent control. The advanced techniques, In-Rack cooling and full dry-condition operation satisfy the cooling requirements of modern data center. Features 1. High Efficiency and Energy Saving -High heat density cooling to eliminate hot spots easily -Auto adjustment of air flow and cooling capacity according to the heat release of server cabinet -Simplified air... -
GMV5 HR Multi-VRF
High efficiency GMV5 Heat Recovery System embodies the excellent features of GMV5(DC inverter technology, DC fan linkage control, precise control of capacity output, balancing control of refrigerant, original oil balancing technology with high pressure chamber, high-efficiency output control, low-temperature operation control technology, super heating technology, high adaptability for project, environmental refrigerant). Its energy efficiency is improved by 78% compared with conventional... -
All DC Inverter VRF Air Conditioning System
VRF (Multi-connected air conditioning) is a type of central air conditioning, commonly known as “one connect more” refers to a primary refrigerant air conditioning system in which one outdoor unit connects two or more indoor units through piping, the outdoor side adopts air-cooled heat transfer form and the indoor side adopts direct evaporation heat transfer form. At present, VRF systems are widely used in small and medium-sized buildings and some public buildings. Characteristics of VRF Ce... -
LHVE Series Permanent Magnet Synchronous Frequency Conversion Screw Chiller
LHVE Series Permanent Magnet Synchronous Frequency Conversion Screw Chiller
-
CVE Series Permanent Magnet Synchronous Inverter Centrifugal Chiller
High-speed permanent magnetic synchronous inverter motor The world’s first high-power and high-speed PMSM is used for this centrifugal chiller. Its power is higher than 400 kW and its rotational speed is above 18000 rpm. Motor efficiency is above 96% and 97.5% to the maximum, higher than national grade 1 standard on motor performance. It is compact and lightweight. A 400kW high-speed PMSM weighs the same as a 75kW AC induction motor. By adopting spiral refrigerant spray cooling technology to... -
Water-cooled Screw Chiller
It is a kind of water-cooled screw chiller with flooded screw compressor that can be connected to all sorts of fan coil unit to realize cooling for large civil or industrial buildings. 1.Precision water temperature control thanks to stepless capacity adjustment from 25%~100%.(single comp.) or 12.5%~100%(dual comp.). 2.Higher heat exchange efficiency thanks to flooded evaporating method. 3. Higher efficiency under partial load thanks to paralleling operation design. 4. High reliability oil re... -
Modular Air-cooled Scroll Chiller
Modular Air-cooled Scroll Chiller
-
Industrial Heat Recovery Air Handling Units
Used for indoor air treatment. Industrial Heat Recovery Air Handling Unit are large and medium-sized air conditioning equipment with functions of refrigeration, heating, constant temperature and humidity, ventilation , air purification and heat recovery. Feature： This product integrates the combined air conditioning box and the direct expansion air conditioning technology, which can realize the centralized integrated control of refrigeration and air conditioning. It has simple system, stabl... -
Heat recovery DX Coil Air Handling Units
Combined with core technology of HOLTOP AHU, DX (Direct Expansion) coil AHU provide both AHU and outdoor condensing unit. It’s an flexible and simple solution for all building area, such as mall, office,Cinema,School etc. The direct expansion (DX) heat recovery and purification air conditioning unit is an air treatment unit that uses air as a source of cold and heat, and is an integrated device of both cold and heat sources. It consists of an outdoor air-cooled compression condensing section... -
Suspended DX Air Handling Unit
Suspended DX Air Handling Unit
-
Heat Recovery Air Handling Units
Air conditioning with air to air heat recovery, heat recovery efficiency is higher than 60%.
-
Round Swirl Diffuser Ring Shape Diffuser
FKO25-Round swirl diffuser FK047-Ring shape diffuser FK047B-Ring shape diffuser -
Air Grille
FKO23-Round return air grille ABS-016 Round air grille FK007D-Removable single/double deflection air grille FK008A-Adjustable single/double deflection air grille FK008B-Adjustable single/double deflection air grille FK040-Double deflection air grille
