Upende Wephansi we-Epoxy Ozilinganiselayo we-2MM
I-JD-2000 iyipende yephansi ye-epoxy engenazo izinyibilikisi ezimbili. Ibukeka kahle, imelana nothuli nokugqwala futhi kulula ukuyihlanza. Uhlelo lwephansi lungahlangana kahle nesisekelo esiqinile futhi lunokumelana okuhle kokuguguleka nokuguguleka. Okwamanje, lunokuqina okuthile, ukumelana nokuqhekeka futhi lungamelana nesisindo esithile. Amandla okucindezela kanye nekhono lokumelana nokushayisana nakho kuhle kakhulu.
Kuphi Ongakusebenzisa:
Isetshenziswa kakhulu ezindaweni ezingenalo uthuli nezingenawo amagciwane njengefektri yokudla, ifektri yemithi, isibhedlela, imishini yokunemba, ifektri kagesi, njll.
Idatha Yobuchwepheshe:
Isikhathi sokomisa: Ukoma kancane: amahora ama-2 Ukomisa kanzima: izinsuku ezi-2
Amandla okucindezela (i-Mpa): 68
Amandla okumelana nomthelela (Kg·cm): 65
Amandla okugobeka (i-Mpa): 40
Ibanga lamandla okunamathela: 1
Ubulukhuni bepensela (H): 3
Ukumelana nokuguguleka (750g/1000r, amandla adonsela phansi angekho, g) ≤0.03
Ukumelana namafutha enjini, uwoyela wedizili izinsuku ezingama-60: akukho shintsho.
Ukumelana ne-20% sulfuric acid izinsuku ezingama-20: akukho shintsho
Ukumelana ne-20% Sodium hydroxide izinsuku ezingama-30: akukho shintsho
Ukumelana ne-toluene, i-ethanol izinsuku ezingama-60: akukho shintsho
Impilo yesevisi: iminyaka engu-8
Ukusetshenziswa Okunconyiwe:
I-Primer: 0.15kg/sqm Ijazi elingaphansi: 0.5kg/sqm+Quartz Impuphu: 0.25kg/sqm Ijazi elingaphezulu: 0.8kg/sqm
Imiyalelo yokusebenzisa:
1. Ukulungiswa kwendawoUkulungiswa kwe-substrate efanele kubalulekile ukuze kusebenze kahle kakhulu. Indawo kufanele ibe nempilo, ihlanzekile, yome futhi ingabi nezinhlayiya ezikhululekile, uwoyela, amafutha, nezinye izinto ezingcolisayo.
2. I-Primer: Lungisa ibhereli, uthele i-JD-D10A kanye ne-JD-D10B kuyo ngokusekelwe ku-1:1. Hlanganisa ingxube kahle bese uyifaka nge-roller noma i-trowel. Ukusetshenziswa okubhekiselwe kukho kungu-0.15kg/㎡. Inhloso eyinhloko yale primer ukuvala ngokuphelele i-substrate nokugwema amabhamuza omoya emzimbeni. I-coat yesibili ingadingeka kuye ngesimo sokumuncwa kwamafutha se-substrate. Isikhathi sokufaka kabusha singamahora angu-8.
Izinga lokuhlola le-primer: ifilimu elinganayo enokukhanya okuthile.
3. Ijazi langaphansi: Hlanganisa i-WTP-MA kanye ne-WTP-MB ngokusekelwe ku-5:1 kuqala, bese ufaka i-quartz powder (1/2 yengxube ka-A kanye no-B) engxubeni, uyixube kahle bese uyifaka nge-trowel. Inani lokusetshenziswa kuka-A kanye no-B lingu-0.5kg /sqm. Ungakwenza lokhu ngejazi elilodwa ngesikhathi esisodwa noma amajazi amabili ngezikhathi ezimbili. Esimweni sesibili, isikhathi sokufaka singamahora angu-8 kuma-degree angu-25. Hlanza ungqimba lokuqala, uluhlanze bese ufaka ungqimba lwesibili. Ngemva kokufaka konke, linda amanye amahora angu-8, ulugaye, uhlanze uthuli lokusila bese uqhubeka nenqubo elandelayo.
Izinga lokuhlola le-undercoat: Ayinamatheli esandleni, ayithambi, ayinyatheli izinzipho uma uklwebha indawo.
4. Ijazi eliphezulu: Hlanganisa i-JD-2000A kanye ne-JD-2000B ngokwesilinganiso esingu-5:1 bese ufaka ingxube nge-trowel. Inani lokusetshenziswa lingu-0.8-1kg/sqm. Ijazi elilodwa lanele.
5. Ukulungiswa: Izinsuku ezingu-5-7. Ungasebenzisi noma ugeze ngamanzi noma ngamanye amakhemikhali.
Hlanza
Hlanza amathuluzi nemishini kuqala ngamathawula ephepha, bese uhlanza amathuluzi nge-solvent ngaphambi kokuba upende uqine
