Fentin bene na Epoxy mai hana tsatsa 2MM

Maydos JD-505 wani nau'in fenti ne na epoxy mai sassa biyu wanda ba ya narkewa, wanda ke da juriya ga ƙura, yana hana tsatsa kuma yana da sauƙin tsaftacewa. Hakanan yana iya guje wa lalacewar kayan lantarki da wuta saboda tarin tsatsa. Ya dace da yankunan irin waɗannan masana'antu inda ake buƙatar hana tsatsa kamar na'urorin lantarki, sadarwa, bugu, injuna masu inganci, foda, sinadarai, kayan aiki, sarari da ɗakin injin.

Amfanin Gamawa (Topcoat):
1. Kyakkyawan kayan kai mai daidaita kai, saman madubi mai santsi;
2. Ba ya haɗa jiki, ba ya ƙura, mai sauƙin tsaftacewa;
3. Ba shi da sinadarin narkewa kuma yana da kyau ga muhalli;
4. Sama mai kauri, sinadarai masu jure tsatsa;
5. Saurin zubar da caji mai sauri, wanda zai iya guje wa lalacewar kayan lantarki da wuta saboda tarin abubuwa masu tsauri;
6. Tsayayya ga saman, ba tare da wani tasiri daga yawan danshi ko lalacewa da tsagewa na saman ba;
7. Zaɓuɓɓukan launi (Ga launuka masu haske, zare baƙi na iya zama a bayyane)

Inda za a yi amfani da shi:
Ya dace da yankunan irin waɗannan masana'antu inda ake buƙatar anti-static kamar na'urorin lantarki, sadarwa, bugu, injina masu inganci, foda, sinadarai, kayan aiki, sarari da ɗakin injin. Musamman ga wuraren bita da ajiya na kayan aikin lantarki da kuma da'irar da aka haɗa waɗanda ke da matuƙar saurin kamuwa da static.

Bukatun tushe:
1. Ƙarfin siminti≥C25;
2. Faɗi: matsakaicin kan faɗuwa tsakanin mafi girma da mafi ƙasƙanci ＜3mm (aunawa tare da ƙa'idar gudu ta 2M)
3. Ana ba da shawarar a goge saman siminti da turmi na siminti.
4. Ana ba da shawarar a yi amfani da maganin hana ruwa da danshi kafin a shafa Layer ɗin simintin da ke daidaita simintin.

Tsarin Aikace-aikacen:
1. Shirye-shiryen substrate: Ya kamata saman ya zama santsi, tsabta, bushe kuma babu barbashi masu laushi, mai, mai, da duk wasu gurɓatattun abubuwa.
2. Firam: A haɗa JD-D10 A da JD-D10B bisa ga 1:1 kuma murfin da aka ambata shine 0.12-0.15kg/㎡. Babban manufar wannan firikwensin shine a rufe substrate gaba ɗaya kuma a guji kumfa mai iska a cikin gashin. Ya kamata a juya fenti sosai bayan an haɗa, sannan a shafa cakuda kai tsaye ta hanyar naɗawa. Bayan an shafa, a jira na awanni 8 sannan a ci gaba da mataki na gaba.
Ma'aunin dubawa: har ma da fim mai haske.
3. Katako mai kauri: A haɗa WTP-MA da WTP-MB bisa ga 5:1 da farko, sannan a zuba garin quartz (1/2 na cakuda A da B) a cikin hadin, a gauraya sosai sannan a shafa da trowel. Yawan amfani da A da B shine 0.3kg /sqm. Za ku iya yin sa a shafa a lokaci guda. Bayan an gama shafa shi, a jira na tsawon awanni 8, a niƙa shi, a tsaftace ƙurar yashi sannan a ci gaba da aikin na gaba.
Ma'aunin dubawa na rufin ƙasa: Ba ya manne da hannu, babu laushi, babu zanen farce idan ka goge saman.
4. Tagulla mai sarrafa kansa mai tsayayye: A shimfiɗa takardar jan ƙarfe a kowane mita 6 a tsaye da kuma a kwance. Sannan a rufe takardar jan ƙarfe da wani Layer na putty mai santsi wanda ba shi da solvent.
5. Tsarin putty mai aiki a tsayeBayan an busar da murfin ƙarƙashin ruwa mai motsi, a haɗa CFM-A da CFM-B bisa ga 6:1 sannan a shafa kai tsaye da spatula. Yawan amfani shine 0.2kg/sqm. Jira na awanni 12 kafin aikin da ke gaba.
Ma'aunin dubawa: Ba ya mannewa, babu laushi kuma babu ƙazanta lokacin da aka goge shi da ƙusa.
6. Firimiyan da ke aiki a tsaye: An yi shi da JD-D11 A da JD-D11 B. A haɗa waɗannan abubuwan guda biyu tare bisa ga nauyin 4:1 sannan a shafa su da abin nadi. Yawan fenti da ake amfani da shi shine 0.1kg/sqm. Bayan an shafa, a jira na awanni 8, a yi masa yashi da injin niƙa, a tsaftace ƙurar sannan a ci gaba da aikin da ke gaba.
7. Gamawa: A haɗa JD-505 A da JD-505 B bisa ga 5:1 sannan a shafa hadin da spatula. A kawar da kumfa da ya faru yayin amfani da abin nadi na haƙori. Yawan amfani shine 0.8kg/sqm.
Ma'aunin dubawa: har ma da fim, babu kumfa, launi iri ɗaya da juriyar karce.
Gyara: Kwanaki 5-7. Kada a yi amfani da shi ko a wanke shi da ruwa da sauran sinadarai.

Bayanan Aikace-aikace na Ƙarshe
Haɗawa: JD-505 A na iya samun ɗan laka yayin ajiya. A juya shi sosai kafin a haɗa shi da sinadarin B. A zuba JD-505 A da JD-505 B a cikin ganga bisa ga rabon gaurayawa sannan a juya gaba ɗaya na minti 2. Kada a goge gaurayawan da ya manne a saman ciki da ƙasan kwano ko kuma gaurayawan da bai daidaita ba zai iya faruwa.
Rufin Bayani: 0.8～2㎏/㎡
Kauri a Fim: kimanin 0.8mm
Yanayin amfani: zafin jiki ≥10 ℃; Danshin da ke da alaƙa <85%